宋学青1， 隋良红2， 张  杰3
（1. 云南省计量测试技术研究院，云南 昆明 650228； 2. 中国测试技术研究院，四川 成都 610021；
3. 四川大学制造科学与工程学院，四川 成都 610065）
摘  要：阐述气动ABS压力调节器的工作原理及其在汽车气制动过程中的作用，从而引出气动ABS压力调节器的参数测试要求。针对ABS压力调节器的基本参数要求，提出气动ABS压力调节器动态性能测试方法，研究测试系统的具体实现方案，设计工控机、电磁阀驱动电路、传感器、压力产生装置、数据采集系统、制动系统和排气系统等主要单元，在实验室实现整个系统的组装并搭建控制和测试平台。实验数据表明：该系统具有较高的可靠性，在气压范围为0～12 MPa的条件下，气压测量准确度，测试精度高，稳定性好。
关键词：压力调节器；气制动；动态性能；测试系统；可靠性
中图分类号：U46；U461.91；U464.336；U467.5+25      文献标志码：A      文章编号：1674-5124（2013）03-0117-04
Research of dynamic performance testing system for pneumatic
ABS pressure regulators
SONG Xue-qing1， SUI Liang-hong2， ZHANG Jie3
（1. Yunnan Institute of Metrology and Testing Technology，Kunming 650228，China；
2. National Institute of Measurement and Testing Technology，Chengdu 610021，China；
3. School of Manufacturing Science & Engineering，Sichuan University，Chengdu 610065，China）
Abstract: Working principle of the pneumatic ABS pressure regulators and the role it plays in the car air braking process were described in this paper， so as to elicit the requirements of the parameters in the test of the pneumatic ABS pressure regulators. For the basic parameters， the test method of the dynamic performance was put forward for the pneumatic ABS pressure regulators， and the specific implementation of the testing system was also researched. The authors mainly designed the industrial computer， the drive circuit of the electromagnetic valve， sensors， pressure generation device， data acquisition system， braking system and exhaust system and other units. The whole system was assembled in the laboratory， and the control and test platform were established for it. The experimental results showed that this system has high reliability， accuracy， good stability and low cost. And the precision of measurable pressure was high in the range of 0-12 MPa.
Key words: pressure regulator； air brake； dynamic performance； test system； reliability