• 南澳电气 NAMDQ双跳圈高压断路器模拟仿真器装置
  • 价格:面议
  • 品牌:南澳电气
  • 产品简介:
  • NAMDQ采用国内独创复合式消弧电路(电子消弧+机械消弧),大大提高了装置的使用寿命和稳定性。同时双跳圈高压断路器模拟装置采用大规模现场可编程门阵列、带保护的功率电子器件等原理制造,跳闸线圈按独立的双回路设计,可以模拟6-750KV电压等级的三相及分相操作、单跳闸线圈或双跳闸线圈

    产品详情商家联系电话:027-87677658

    NAMDQ双跳圈高压断路器模拟装置(又名模拟断路器仿真器装置、高压断路器模拟装置)

    产品别名

    模拟断路器仿真器装置,双跳圈高压断路器模拟装置,高压断路器模拟装置

    产品特点及用途

    NAMDQ采用国内独创复合式消弧电路(电子消弧+机械消弧),大大提高了装置的使用寿命和稳定性。同时双跳圈高压断路器模拟装置采用大规模现场可编程门阵列、带保护的功率电子器件等原理制造,跳闸线圈按独立的双回路设计,可以模拟6-750KV电压等级的三相及分相操作、单跳闸线圈或双跳闸线圈断路器的动作行为,适用于电力系统、工矿企业、科研院所、专业院校、保护厂家选用,作为继电保护及自动装置带开关整组系统传动试验时实际断路器的替代设备,动作准确、可靠、动作次数不受限制,可以大大提高试验的正确性与完整性,最大限度地降低实际断路器的动作次数,提高使用寿命,是继电保护试验工作的重要配套设备。NAMDQ外形结构为便携式使用工程塑料防水机箱,适用于现场试验使用。

    NAMDQ high-voltage circuit breaker simulation device

    (also known as double-hop high-voltage circuit breaker analog device)

    Product features and usage

    NAMDQ uses domestic original compound arc suppression circuit (electronic arc extinction + mechanical arc), greatly improving the device life and stability. At the same time double-hop high-voltage circuit breaker analog devices using large-scale field programmable gate array, with the protection of the principle of manufacturing power electronic devices, tripping coil in an independent dual-loop design, can simulate the voltage level 6-750KV three-phase and phase Operation, single trip coil or double trip coil circuit breaker action behavior for power systems, industrial and mining enterprises, research institutes, professional institutions, the protection of manufacturers use, as a relay protection and automatic devices with the entire group of transmission test drive system The actual circuit breaker replacement equipment, action accurate, reliable, unlimited number of actions can greatly improve the correctness and integrity of the test, to minimize the number of actual circuit breaker action and improve service life, is the relay protection test work Of the important ancillary equipment. NAMDQ exterior structure for the portable use of engineering plastic waterproof chassis, suitable for field test use.

    NAMDQ高压断路器模拟装置技术参数

    工作电源电压

    AC 220V 10% 50Hz

    跳、合闸操作电压

    DC 220V或DC 110V

    跳、合闸线圈

    单合双跳线圈,跳闸6相,合闸3相

    动作方式

    单相/三相

    跳、合闸时间

     

    跳闸时间选择

    20ms、30ms、40ms、50ms、60ms、70ms、80ms、90ms、100ms、110 ms,误差不超过±5 ms

    合闸时间选择

    40ms、60ms、80ms、100ms、120ms、140ms、160ms、180ms、200ms、500 ms,误差不超过±5 ms,(500ms时,误差不超过±20 ms)

    跳、合闸电流

     

    跳闸电流(电阻)选择

     ∞Ω、400Ω、200Ω、100Ω,可以根据用户要求任意配置。跳闸线圈Ⅰ、Ⅱ并联使用时,跳闸电流增大一倍

    合闸电流(电阻)选择

    ∞Ω、400Ω、200Ω、100Ω,可以根据用户要求任意配置。

    断路器失灵

     

    开出量

     

    接点容量

    DC-0.5A/220V,AC-5A/220V

    断路器位置输出接点

    断路器位置输出接点12对,相互独立。分为两组,与断路器跳闸线圈相对应。跳闸线圈Ⅰ每相1对常开和1对常闭接点。跳闸线圈Ⅱ有每相1对常开和1对常闭接点。

    手合、手跳接点

    手合、手跳按钮各有一对同步输出常开接点

    厂商资料
    主要从事电力仪器仪表、交直流分压器、互感器类测试设备、高压耐压设备、峰值电压表、超声局放定位系统、工频信号发生器、冲击电压电流发生器 、变压器类试验设备、继电保护测试仪、SF6及开关类检测设备、局部放电超声检测系统、避雷器测试设备、环境人工气候模拟实验装置、电能表校验设备、蓄电池检测仪等产品的研发。
    厂商动态
     
    网站首页  |  关于我们  |  联系我们  |  广告服务  |  版权隐私  |  友情链接  |  站点导航